ISOSTATIC CB-0810-07 Sleeve Bearings

UPC:782475836819; Brand:Baldor-Dodge; Screw Diameter:1.2500 in; Angle Size:5 X 5 X 1/2; Screw Treatment:ZINC PLATED; Take-Up Frame Travel:60.0000 in; Take-Up Frame Style:HEAVY DUTY; Special Coating:STANDARD PAINT; Material Type:CARBON STEEL; Frame Size:350;

B:31 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; J:78 mm; T min.:-20 °C; Weight:0.5 kg; J1:40 mm; A2:33.3 mm; Z:22.7 mm; L:60 mm;

Harmonized Tariff Code:8482.10.50.68; Characteristic rolling element frequency, BSF:8.32 Hz; Characteristic inner ring frequency, BPFI:8.95 Hz; B:35 mm; Max operating temperature, Tmax:120 °C; Category:Single Row Ball Bear; Min operating temperature, Tmin:-20 °C; Radial clearance class:CN; Other Fea

D:42 mm; D1:37.6 mm; Snap ring reference:R42; Nref:18,000 rpm; b min:1.35 mm; Fatigue limit load, Cu:0.23 kN; ra max:0.6 mm; D4 max:46.3 mm; r0 max:0.4 mm; f:1.07 mm;

N:35mm; G:M6x1; C0:29.2 kN; H2:102 mm; B:55.4 mm; Designation of open end cover:SCOE211-55; A:64 mm; A2:38 mm; H:146 mm; L3:95 mm;

S:25.4 mm; L:160 mm; A2:73.7 mm; G:R1/8"; d:63.5 mm; C:57.2 kN; A:57 mm; N:21mm; Z:82.4 mm; Recommended tightening torque for set screw:16.8 Nm;

A:38 mm; C0:20.8 kN; A1:16 mm; G:M6x1; B:49.2 mm; J:105 mm; Recommended tightening torque for set screw:8 Nm; d:42.86 mm; Z:56.3 mm; Weight:2.23 kg;

H:85 mm; Designation of bearing:UC206-18G2L4; d:28.58 mm; S:15.9 mm; C:19.5 kN; Designation of housing:C206-; B:38.1 mm; A3:1.5 mm; C0:11.2 kN; A5:22.2 mm;

C:113.36 kN; B:74.6 mm; H:190 mm; T min.:-20 °C; s1:69.1 mm; d1:113 mm; B1:100 mm; T max.:100 °C; SW:8 mm; C0:76.8 kN;

B:25.4 mm; C:25.7 kN; C0:15.2 kN; e:1 mm; s1:30.2 mm; L:135 mm; T min.:-20 °C; Recommended tightening torque for set screw:11.5 Nm; N:11,5mm; S:9.5 mm;

A1:20 mm; s1:15.5 mm; Designation of housing:PG204-; J:49 mm; d:15.88 mm; B:31 mm; Weight:0.6 kg; G:M6x1; A:38 mm; H2:64 mm;

Cage Material:Steel; Characteristic rolling element frequency, BSF:8.28 Hz; Dynamic load, C:143 kN; operating temperature range:-40 to 120 ºC; Maximum Capacity / Filling Slot:No; fillet radius:2.1 mm; Weight / LBS:11.1; Max operating temperature, Tmax:120 °C; Characteristic inner ring frequency

Recommended tightening torque for set screw:5.5 Nm; G:M6x1; N:M8; T max.:100 °C; L:70 mm; C:12.8 kN; T min.:-40 °C; S:12.7 mm; H1:14 mm; H:33.3 mm;

s1:16 mm; T min.:-40 °C; N:M14; G:M6x1; H1:13 mm; d:34.92 mm; Weight:1.38 kg; B:32 mm; A:48 mm; L:110 mm;

Designation of housing:P204N-; B:31 mm; C0:6.65 kN; H:33.3 mm; Recommended tightening torque for set screw:5.5 Nm; L1:42 mm; S:12.7 mm; s1:15.5 mm; H1:15 mm; A1:22 mm;