Angular Contact Ball Bearings

Contact Now

Angular Contact Bearings feature raceways with high and low shoulders. These opposing raceways are designed to accommodate axial loads in one direction in addition to radial loads. Self-retaining units with solid inner and outer rings and ball and cage assemblies.Machined Brass cages are machined from cast or wrought brass and are unaffected by most common bearing lubricants, including synthetic oils and greases. Clean up using normal organic solvents.Angular Contact Bearings are designed to accommodate axial and radial loads acting simultaneously. Double row design for multidirectional axial load, similar to a pair of single row bearings, but taking up less axial space. Made from high-quality chromium bearing steel. The ball bearings are separated by high-speed Polyamide cages. Polyamide cages offer high-impact strength, abrasion- and wear-resistance, and energy and shock absorption.
Lightweight Phenolic cages are made from cotton fabric-reinforced resin. Withstands heavy inertial forces and operating temperatures up to 250°F (120°C). Phenolic cages tend to absorb oil, helping in the lubrication of the cage/rolling element contact.Pressed Steel cages are constructed from sheet steel that is made into curved sections by press forming.

NTN 6206 Bearing

50 mm 7
0.3 mm 7 mm

FAG 7215-B-MP-S1-UA Angular Contact Ball Bearings

225 kN 1700 r/min
310 200

FAG 7215-B-JP-UO Angular Contact Ball Bearings

165 mm 120 mm
22 55 kN

FAG 7213-B-JP-UO Angular Contact Ball Bearings

SKF 140 mm
RBEC 1 | ISO P0 Metric

FAG 3220-M-L61 Angular Contact Ball Bearings

3,600 rpm 19 mm
129 mm 0.036 to 0.066 mm

FAG 7307-B-TVP-UA80 Angular Contact Ball Bearings

60 mm 2 mm
NUP 2310 ECP Yes

FAG 7307-B-MP-UL Angular Contact Ball Bearings

42x52x14 42
14 mm 14

FAG 7307-B-MP-UA80 Angular Contact Ball Bearings

3,967 3,967 mm
0,149 kN 7,3 mm